Information

When the molecular ratio is high, Aluminium Fluoride AlF3 products are added for adjustment. When the molecular ratio is low, add sodium fluoride or soda ash to adjust. How to add Aluminum Fluoride AlF3 products: Aluminum Fluoride AlF3 products should be added to the middle part of the aluminum oxide shell, that is, after processing, add a layer of aluminum oxide, then evenly sprinkle Aluminum Fluoride AlF3 products on the thin shell, and then add insulation materials . In subsequent processing, the Aluminum Fluoride AlF3 products can be driven into the grooves together with the surface shell without stripping.

Notes on adding Aluminum Fluoride AlF3 products:

(1)Aluminum Fluoride AlF3 products should not be added to the surface of the electrolyte, nor should it be near the flame hole and anode.

(2) Aluminum Fluoride AlF3 products should not be added before the aluminum is released.

(3) In order to reduce the loss of Aluminum Fluoride AlF3 products, Aluminum Fluoride AlF3 products can be mixed with cryolite. Aluminum Fluoride AlF3 products are best added in the first processing after the aluminum is produced in the electrolytic cell, and can be added in the processing of the small end of the electrolytic cell at ordinary times.

In the new energy materials industry, adding 1% of Aluminum Fluoride AlF3 products can improve the high temperature cycle performance of lithium manganate batteries in the process of preparing lithium manganate cathode material.