Information

Information

Melting point boiling point of Neodymium Fluoride NdF3


Release Time:

2022-07-15

Neodymium Fluoride NdF3 under the microscope, the burning temperature is 1050 degrees, the surface roughness becomes round, and the crack is the standard.

Neodymium Fluoride NdF3 under the microscope, the burning temperature is 1050 degrees, the surface roughness becomes round, and the crack is the standard. Size 9 has been replaced by the standard clear pink. After burning out, the mixture of hydrochloric acid and nitric acid was soaked at 80°C for 24 hours to eliminate dissociation. Soak 30% hydrochloric acid and corrosion inhibitor for 60 minutes. Then observe the color change, soak in 10% hydroxy acid for 60 minutes and set the time.

Neodymium Fluoride NdF3

Wash and dry, add EDTA and triethanol after stirring. Add 10% alcohol. The particle size of the mixing ball mill is 0.5um10. The final product has the same color coordinates as the standard sample. To meet cleaning particle size standards. Neodymium Fluoride NdF3 Properties: 1. White powder, purplish red. Density (g/ml, 25/4℃): 6.506;

Melting point (°C) of Neodymium Fluoride NdF3: 1410. Boiling point (℃, atmospheric pressure): 2300; Neodymium Fluoride NdF3 Solubility: insoluble in water, insoluble in hydrochloric acid, nitric acid, sulfuric acid, soluble in perfluoric acid; relatively stable in hygroscopicity in air. Neodymium Fluoride NdF3 product application: used in the preparation of detector scintillators. Rare earth crystal laser material and rare earth chloride glass fiber.